KONICA SRX-101 Table Top Automatic Film Processor

	Saves valuable space and incorporates an automatic standby with jog cycle for conserving water and energy.  State of the art technology stabilizes developer and dryer temperatures. It also offers automatic replenishment.

Specifications:

Film Transport Method:	Continuous roller transport
Film Type and Sizes:	Sheet film, 10x10cm up to 14x17" (35x43cm)
Processing Cycles/capacity:	Cycle/size	10x12" or 24x30cm	14x17" (35x43cm)
	90 sec.	75	60
	120 sec.	70	55
	170sec.	55	40 (sheets/hr)
Process cycle switching:	Available by a service engineer
Processing solution volumes:	Dev tank:  3.9 liters (1.03 gal.) Fix tank:  1.8 liters (0.47 gal.) Wash tank:  1.4 liters (0.37 gal.)
Circulation system:	Continuous pumping of developer and fixer solutions
Temperature control:	Processing solution temperature: controlled by the temperature control tank, with the thermistor monitoring, and with the heater heating. Drying temperature: controlled automatically according to a fixed temperature setting.
Replenishing system:	Teplenishing volume for the film sheet is calculated with exchanging 10x12" film
Wash water:	Ordinary tap water 41-86° F (5-30° C) Water pressure 49-686kPa (0.5-7kgf/cm²) (7-98psi)
Water supply:	0.8 liters (0.22 gal)/min.
Standby functions:	10min./30min./Continuous operation. (selectable by a service engineer)
Power source:	AC 115/120V, single phase, 12A, 60 Hz.
Weight:	88 Lbs./40kg (103.4Lb./47kg with processing solutions)
Certification:	Conforms to UL, FDA
Applied standard:	FCC
Heat generation:	Approx. 3,135 kJ/h max.
Noise level:	Approx. 55dB(A) max.
Operating condition:	59-86°F (15-30°C), 30-75%RH (no condensation)
Accessories:	Measuring cup, funnel, installation parts kit, replacement parts kit, replenisher tanks, and operation manual
Optional equipment:	Light shield panel, stand, splash guard